How to Use the Rotary

How to Use the Rotary

Due to height restrictions, the rotary needs to be used with an optional base.

Operation Step:

1.Remove the fours screws with a 2.5 allen wrench, and take it out.

2.Adjust the drawer installation position according to the height of the rotary and the workpiece.

3.Place the rotary axis on the work platform.


4.Align the groove of the plug with the protrusion of the jack and tighten the screw.

5.Place the material to be processed on the rotating shaft and turn the red knob to fix the material.
6.Move the laser head so that the red light is at the appropriate position of the material to complete automatic focusing, and then turn on the boat switch.
7.After the software connects to the device,

① click Laser Tools,

② click Rotary Setup,

③ open the Enable Rotary,

④ click OK.

     
8.Further Operations:

           ①Click Edit,

②Select Machine Settings ,

③Save the file,

④Click Calibrate Axis.

     

9.Upload the file, set the origin and border, and then start processing.

After using the rotary axis, open the Machine Settings window.

① Load the file saved in step 2,

② Click OK.

       

    • Related Articles

    • How to use One Laser Hydra camera

      ntroduction: The purpose of this document is to instruct users on how to connect, calibrate and use the One Laser Hydra series camera. Preparation USB cable*1, PC*1, USB flash drive*1, Lightburn software Connecting the machine and the camera 1. ...

    • How to Use the Camera

      Attention The camera can only communicate via USB cable. Operation Guide After switching on the machine, connect your computer to the machine using the USB cable and the camera cable. Start the LightBurn software and confirm that the machine is ...

    • Touchscreen get stucked after turning on

      Issue Phenomenon After turning the machine on, the touch screen panel has been stuck in this page and cannot enter the main interface. Operational Guide Rotary switch are on Please turn off the rotary switch and then try to reboot the machine again. ...

    • One Laser Hydra Touchscreen Function Introduction

      Introduction： This document offers a comprehensive guide to the functions of each button on the control panel, ensuring a thorough understanding of their operations. 1.How to use the display 1. Z axis button: control the table to move in Z-axis. 2. ...

    • Maintenance Guide

      Optical Maintenance Tool Requirements Lens cleaner、Q-tip、hex key If the provided cleaning cleaner runs out, we recommend using absolute ethanol to clean the lens. To avoid damaging the lens coating, please do not use isopropyl alcohol. If the ...